Journal cover Journal topic
Atmospheric Measurement Techniques An interactive open-access journal of the European Geosciences Union

Journal metrics

  • IF value: 3.089 IF 3.089
  • IF 5-year<br/> value: 3.700 IF 5-year
    3.700
  • CiteScore<br/> value: 3.59 CiteScore
    3.59
  • SNIP value: 1.273 SNIP 1.273
  • SJR value: 2.026 SJR 2.026
  • IPP value: 3.082 IPP 3.082
  • h5-index value: 45 h5-index 45
https://doi.org/10.5194/amt-2017-352
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 4.0 License.
Research article
29 Nov 2017
Review status
This discussion paper is a preprint. It is a manuscript under review for the journal Atmospheric Measurement Techniques (AMT).
Assessing the degree of plug flow in oxidation flow reactors (OFRs): a study on a Potential Aerosol Mass (PAM) reactor
Dhruv Mitroo1,a,*, Yujian Sun1,*, Daniel P. Combest2, Purushottam Kumar3, and Brent J. Williams1 1Department of Energy, Environmental & Chemical Engineering, Washington University in St. Louis, St. Louis, MO, USA
2ENGYS, Ltd.
3Discipline of Chemical Engineering, Indian Institute of Technology Gandhinagar, Palaj, Gujarat 382355, India
anow at: Department of Atmospheric Sciences, Rosenstiel School of Marine and Atmospheric Sciences, University of Miami, Miami, FL, USA
*These authors contributed equally to this work.
Abstract. Oxidation flow reactors (OFRs) have been developed to achieve high degrees of oxidant exposures over relatively short space times (defined as the ratio of reactor volume to the volumetric flowrate). While, due to their increased use, attention has been paid to their ability to replicate realistic tropospheric reactions by modeling the chemistry inside the reactor, there is a desire to customize flow patterns. This work demonstrates the importance of decoupling tracer signal of the reactor from that of the tubing when experimentally obtaining these flow patterns. We modeled the residence time distributions (RTDs) inside the Washington University Potential Aerosol Mass (WU-PAM) reactor, an OFR, for a simple set of configurations by applying the tank-in-series (TIS) model, a one parameter model, to a deconvolution algorithm. The value of the parameter, N, is close to unity for every case except one having the highest space time. Combined, the results suggest that volumetric flowrate affects mixing patterns more than use of our internals. We selected results from the simplest case, at 78 s space time with one inlet and one outlet, absent of baffles and spargers, and compared the experimental F-Curve to that of a computational fluid dynamics (CFD) simulation. The F-Curves, which represents the cumulative time spent in the reactor by flowing material, match reasonably well. We value that the use of a small aspect ratio reactor such as the WU-PAM reduces wall interactions, and suggest applying the methodology of tracer testing described in this work to investigate RTDs in OFRs and modify inlets, outlets, and use of internals prior to applications (e.g., field deployment vs. laboratory study).

Citation: Mitroo, D., Sun, Y., Combest, D. P., Kumar, P., and Williams, B. J.: Assessing the degree of plug flow in oxidation flow reactors (OFRs): a study on a Potential Aerosol Mass (PAM) reactor, Atmos. Meas. Tech. Discuss., https://doi.org/10.5194/amt-2017-352, in review, 2017.
Dhruv Mitroo et al.
Dhruv Mitroo et al.
Dhruv Mitroo et al.

Viewed

Total article views: 166 (including HTML, PDF, and XML)

HTML PDF XML Total Supplement BibTeX EndNote
121 42 3 166 12 1 2

Views and downloads (calculated since 29 Nov 2017)

Cumulative views and downloads (calculated since 29 Nov 2017)

Viewed (geographical distribution)

Total article views: 166 (including HTML, PDF, and XML)

Thereof 166 with geography defined and 0 with unknown origin.

Country # Views %
  • 1

Saved

Discussed

Latest update: 12 Dec 2017
Publications Copernicus
Download
Short summary
In light of the widespread use of chemical reactors that simulate daytime atmospheric chemistry, a more critical analysis of the engineering behind new ones is needed. This work seeks to evaluate the geometry and flow dynamics inside a novel reactor, the potential aerosol mass (PAM) reactor, to help researchers tailor its use based upon what chemistry is investigated.
In light of the widespread use of chemical reactors that simulate daytime atmospheric chemistry,...
Share