www.atmos-meas-tech-discuss.net/2/2639/2009/ doi:10.5194/amtd-2-2639-2009 © Author(s) 2009. This work is distributed under the Creative Commons Attribution 3.0 License. The MIPAS2D database of MIPAS/ENVISAT measurements retrieved with a multi-target 2-dimensional tomographic approach 1ISAC-CNR – Istituto di Scienze dell'Atmosfera e del Clima, Via Gobetti, 101 – 40129 Bologna, Italy 2Dipartimento di Chimica Fisica e Inorganica, Università di Bologna, Viale del Risorgimento, 4 – 40136 Bologna, Italy 3IAC-CNR – Istituto per le Applicazioni del Calcolo ''Mauro Picone'', Via Madonna del Piano, 10 – 50019 Sesto Fiorentino (FI), Italy *now at: Serco SpA, Via Sciadonna, 24 – 00044 Frascati (RM), Italy Abstract. We present a multi-year database of atmospheric state parameters retrieved for the upper tropospheric to mesospheric region from satellite measurements with a 2-dimensional tomographic approach. The full mission of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) instrument, on board the European Space Agency ENVISAT satellite, is analyzed with the Geofit Multi-Target Retrieval (GMTR) system to obtain the MIPAS2D database with atmospheric fields of pressure, temperature and volume mixing ratio of MIPAS main targets H2O, O3, HNO3, CH4, N2O, and NO2. The database covers both the MIPAS nominal observation mode measured at Full Resolution (FR) from July 2002 to March 2004 and the nominal observation mode of the new configuration, measured at Optimized Resolution (OR) and introduced in 2005. Further to the main targets, minor species N2O5, ClONO2, COF2, CFC-11, and CFC-12 for the FR mission only have been included in MIPAS2D to enhance its applicability in studies of stratospheric chemistry. The database is continuously updated with the analysis of the ongoing measurements that are planned to last until the end of 2013. The GMTR algorithm is operated on a fixed vertical grid coincident with the tangent altitudes of the FR nominal mode, spanning the altitude range from 6 to 68 km. In the horizontal domain, FR measurements are retrieved on both the observational grid and an equispaced 5 latitudinal-degrees grid which is made possible by the 2-dimensional retrieval algorithm. The analysis of MIPAS OR observations is operated on the same altitude-latitude fixed retrieval grid used for the FR measurements. This choice provides a homogeneous database in altitude and latitude, over the whole globe, covering to date about seven years of measurements. The equispaced latitudinal grid provides a new and convenient layout for the much needed synergetic studies of data from various instrumental and modeling sources. MIPAS2D is available to the scientific community through the two web sites http://www.mbf.fci.unibo.it/mipas2d.html, and http://www.isac.cnr.it/~rss/mipas2d.htm. Discussion Paper (PDF, 2949 KB) Interactive Discussion (Closed, 4 Comments) Final Revised Paper (AMT) Citation: Dinelli, B. M., Arnone, E., Brizzi, G., Carlotti, M., Castelli, E., Magnani, L., Papandrea, E., Prevedelli, M., and Ridolfi, M.: The MIPAS2D database of MIPAS/ENVISAT measurements retrieved with a multi-target 2-dimensional tomographic approach, Atmos. Meas. Tech. Discuss., 2, 2639-2688, doi:10.5194/amtd-2-2639-2009, 2009. Bibtex EndNote Reference Manager XML |
|